Metalength need the following for our project. Please quote as per attached details
Distance between twists is 330.2mm
hexagonal mesh netting "reverse twist". galvanlsed after weaving and coated in blue plastic.
This netting is embedded in the fire protection coatin Nominal wire diameter (d) is the diameter in mm to designate the wire.
Real wire diameter is the anthmetical mean of the minimum and maximum diameter, measured in the same section of a straight piece of wire by mean of the minimum and maximum diameter.
Nominal mesh size is the distance in mm to designate the mesh.
Real mesh size (a) is the distance in mm between the twists.
Metalength are using low carbon steel welded mesh hot dip Zinc galvanized. Woven by galvanized wire then PVC coated (Gal. wire diameter 1.1mm, PVC wire 1.5mm by XiaoYong Welded Mesh).
The mesh we use is 0.8-0.9 mm wire and square opening of about 10mm.
Mesh width is 1m and annual use is about 2000m.
We now need the following products:
1,PVC COATED GALVANIZED WIRE MESH 1.5 X 25 X 25 MM [ 1Mx25M ]
2,Stainless Steel 316 Wire Mesh 2" x 2", Wire 3mm c/w PVC Coated,
Size : 1.5 meter (W) x 50 meter (L)
UoM : 75m2
Quantity : 1 lot
1. we need to know if you do PVC or Epoxy coating and if the PVC or Epoxy coating withstands temperatures of +70C to -60C ?
2. need to know if the PVC or Epoxy coating withstands UV radiation over time? (Grey/Black PVC might have better UV resistance)
3. What will be the thickness of the PVC or Epoxy coating?
4. Can you send us a small piece of similar mesh with PVC and Epoxy coating for evaluation?
Contact Metalength steel wire mesh now