woven square wire mesh

Mallas is the major manufacturer of stainless steel wire mesh of China, specially known for its best quality and excellent reputation. Popular materials used are to DIN 1.4301 / AISI 304 and DIN 1.4401 /AISI 316. Opening types can be square mesh or space meshes.

Varieties of Stainless Steel Wire Mesh:
Mallas Square Wire Mesh in Stainless Steel can be classified into: Plain weave and Twill weave. Fine woven wire cloth can be classified into Dutch weave, Reverse and Five Heddle weave.

  • Features

Stainless Steel Wire Mesh Plain weave is the most commonly used weave. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.

Twill Weave Stainless Steel Wire Mesh is made by each weft wire passing alternately over two, and then under two successive warp wires and each warp wire passing alternately overwoven square wire mesh two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.

Varieties according to materials:
Stainless steel wire mesh type 304
Stainless steel wire mesh type 304L
Stainless steel wire mesh type 316
Stainless steel wire mesh type 316L

Uses: Stainless steel wire mesh and stainless steel wire cloth products are widely used in petroleum, chemical industry, environment protection, mine, airspace, paper-making, electronic, metallurgy etc. Special size and specification are available according to customers' requirement.

Sizes: (Width/Length)
Standard roll width: 1m to 48"

Standard roll length: 30m to 100"
 
Stainless Steel Woven Wire Mesh (Plain Weave)
mesh/inch
wire diameter
(mm)
aperture
(mm)
-
mesh/inch
wire diameter
(mm)
aperture
(mm)
2mesh
1.80
10.90
60mesh
0.15
0.273
3mesh
1.60
6.866
70mesh
0.14
0.223
4mesh
1.20
5.15
80mesh
0.12
0.198
5mesh
0.91
4.17
90mesh
0.11
0.172
6mesh
0.80
3.433
100mesh
0.10
0.154
8mesh
0.60
2.575
120mesh
0.08
0.132
10mesh
0.55
1.990
140mesh
0.07
0.111
12mesh
0.50
1.616
150mesh
0.065
0.104
14mesh
0.45
1.362
160mesh
0.065
0.094
16mesh
0.40
1.188
180mesh
0.053
0.088
18mesh
0.35
1.060
200mesh
0.053
0.074
20mesh
0.30
0.970
250mesh
0.04
0.061
26mesh
0.28
0.696
300mesh
0.035
0.049
30mesh
0.25
0.596
325mesh
0.03
0.048
40mesh
0.21
0.425
350mesh
0.03
0.042
50mesh
0.19
0.318
400mesh
0.025
0.0385
 

Stainless Steel Woven Wire Mesh (Twill Weave)
mesh
wire diameter (mm)
aperture (mm)
material (AISI)
250mesh
wire dia.0.040mm
0.063
304 or 316
300mesh
wire dia.0.040mm
0.044
304 or 316
325mesh
wire dia.0.035mm
0.043
304 or 316
350mesh
wire dia.0.030mm
0.042
304 or 316
400mesh
wire dia.0.030mm
0.033
304 or 316
 
Stainless Steel Wire Cloth (Plain Dutch Weave)
Mesh Wire Diameter (d0) Aperture
Vertical Horizontal Vertical Horizontal Microns
12 64 0.62 0.42 270-290
14 80 0.50 0.30 220-240
24 110 0.38 0.25 115-125
30 160

0.23

 0.18 95-100
40 200 0.18 0.14 70-75
50 250 0.14 0.11 60-63
 
Stainless Steel Wire Cloth (Twill Dutch Weave)
Mesh Wire Diameter (d) Aperture
Vertical Horizontal Vertical Horizontal Microns
20 250 0.25 0.23 110-120
32 360 0.23 0.15 100-110
40 400 0.18 0.14 90-110
50 500 0.14 0.11 70-90
50 600 0.14 0.09 60-70
80 800 0.12 0.07 45-65
165 800

0.07

 0.05 24-26
120 1000 0.08 0.055 27-28
165 1450 0.07 0.04 16-18
325 2300 0.038 0.025 8-9